Kia
RioThe cost of work in each case is individual and depends on the condition of the vehicle optics, its malfunctions, the exchange rate when purchasing consumables and elements of vehicle optics and vehicle lighting.
Cost of works and materials:
-
Installation kit bi-lenses 3.0 inch
3300 UAH -
LED strip DHO
1470 UAH -
Putting a logo on the bi-lens
1000 UAH -
Work on installation
2000 UAH
-
Overview
This car has already succumbed to the installation of bi-xenon lenses, but for some reason were installed lenses size2.5 inches. According to the owner of the car, the installers claimed that 3.0 inch lenses will not physically fit into the headlight of this car. Our Car Light Design team dispelled this myth for the car owner and all those who doubted the physical installation of the Galaxy G5 3.0 inch bi-xenon lens into the headlights of the car.
-
Certainly, the 2.5 inch lenses produce light comparable to the factory halogen H4 bulb light. But the 3.0 inch bi-lenses give much more light output on the roadway than the 2.5 inch lenses! The choice of our team fell to Galaxy G5 3.0 inch bi-xenon lenses for H1 lamp with 55w socket blocks. This set is absolutely organically installed in the headlights of the car without any physical changes. It was decided not to change the lamp base, as the car was installed by the past installers bi-lenses 2.5 inches under the H1 lamp YAEKY with 35w ignition units. The owner of the car also said that the installers assured that the 55w ignition blocks would melt the headlight glass. But after installation of 3.0 inch bi-lenses under H1 lamp with 55w blocks by our team, there are no melted glasses, burns on the glass, etc. Contact only professional car optics upgrade and service stations for advice and installation.
-
In addition to the headlight tuning section was made logo drawing on the new 3.0 inch lenses. The drawing is ‘drawn with the inscription KIA’. Inside the lens are installed RGB diodes, which contribute to change the illumination of the lens in the role of ‘devil's eye’. Masks (blends) of lenses are chosen with ‘angel eyes’ for additional effect.
-
In the fog lights of the car was made an additional installation of DHO LED tape with the function of running indicator. DHO function allows you to mark the boundaries of the car and adds additional luminescence, as well as adds a personalised look to the car as a whole.
-
The difference between the 2.5‘ MoonLight EVO and 3.0’ Galaxy G5 lenses can be seen in the photos without any instruments. After installation of the Galaxy G5 3.0 inch bi-xenon lenses, light level correction and horizon alignment were performed.
-
Individual design of bi-xenon lenses 3.0 inch Galaxy G5
Individual design of bi-xenon lenses 3.0 inch Galaxy G5, on the lens is made logo ‘chertanka’ with the inscription KIA. A WGB lens backlight was installed, allowing the backlight colours to be changed. Additionally modernisation of PTF (fog lights) was made, LED strip DHO with running indicator function was installed.
-
And again this car came back to us for modification! The customer really wanted to install an additional LED strip in the headlights! Of course our team did not refuse this service and happily took the car for headlight modification. At the end of the work, the car had 4 DHO tape, main headlights and fog lights. Also installed LED strip has a running indicator function. Very interesting look turned out to be a car!
-
Installation and synchronisation of all 4 DHO LED strips.
This tape as we previously described has two functions - DHO and running indicator. Installation and synchronisation of all 4 DHO LED strips. The appearance of the car is simply unrecognisable!
-
Cost of work performed:
More informationCar
Kia RioCompleted works
-
Installation kit bi-lenses 3.0 inch
3300 UAH -
LED strip DHO
1470 UAH -
Putting a logo on the bi-lens
1000 UAH -
Work on installation
2000 UAH -
The total cost
9240 UAH
Result
The cost of work in each case is individual and depends on the condition of the automotive optics, its problems, the exchange rate when purchasing consumables and installation elements for automotive optics and auto lights.
-
More completed works
-
Sealing the optics of a Toyota Prado 120
While painting the car, the owner took the opportunity to update the optics. We disassembled the headlights, dried the blocks, cleaned the glass and applied new sealant to completely restore the tightness.
Read more Sealing of car headlights -
Installation of Galaxy Q5 Quoris 3.0 inch headlights in KIA Cerato Koup
A complete headlight upgrade – from dismantling harmful xenon to installing powerful bi-folding headlights with masks and angel eyes. Safety and style in one solution!
Read more Installation of lenses in car headlights -
Repair of rear lights on an Infiniti FX35
The owner of an Infiniti FX35 was left without clearance lights and brake lights due to burnt-out diodes. We re-soldered the line with new original diodes and restored the rear lights to their factory condition.
Read more Prevention of car headlights -
Repair of fogging headlights on a Subaru Legacy
Moisture inside the headlight destroyed the ignition unit. We completely disassembled, dried and sealed it to protect the optics from further damage.
Read more Sealing of car headlights -
Headlight grinding and polishing for Mitsubishi Lancer 9
We completely restored the transparency and shine of the headlights, and applied a polyurethane film to protect them from further damage.
Read more Polishing and grinding of car headlights
We value your privacy 
