We accept clients by appointment.
We work: Mon-Fri- 09:00-20:00 / Sat -Sun - closed
The cost of work in each case is individual and depends on the condition of the vehicle optics, its malfunctions, the exchange rate when purchasing consumables and elements of vehicle optics and vehicle lighting.
Cost of works and materials:
Installation kit of 3.0 bi-xenon headlights
8440 UAHGrinding and polishing of headlights
800 UAHWrapping with polyurethane film
1200 UAHDRL LED strip
1470 UAHInstallation work
2000 UAHThe owner of the car contacted our team to get good light on the roadway and minimal headlight tuning. When the car arrived at our service, the biggest surprise for us was the car's glass. The front part of the glass was scratched in a circular motion, and it was hard to tell why in only one place. After disassembling the headlights, everything fell into place. The factory coating inside the glass was covered with a crust, which had already crumbled. The inside of the glass needs to be sanded and polished, just like the outside of the glass. If you do not remove the cork varnish inside the glass, the light flux will not be as efficient as possible on the roadway, and the appearance of the headlight leaves much to be desired!
Galaxy Q5 Quoris 3.0-inch bi-xenon lenses were installed in the car's headlights under the D2S lamp with 55wignition units. Original Philips D2S 4.300K lamps and 55w Fast Bright Prime ignition units were installed.
The hoods were chosen with the ‘angel eyes’ function, and additionally, a DRL LED strip with the Lexus-style running turn signal function was installed. The car owner did not expect such a result from the headlight restoration. After a full cycle of grinding and polishing the headlights, they were covered with polyurethane film.
Comparative photos of the Honda Civic 4d headlightsbefore and after the installation of the bi-xenon headlights.
Car
Honda Civic 4dCompleted works
Installation kit of 3.0 bi-xenon headlights
8440 UAHGrinding and polishing of headlights
800 UAHWrapping with polyurethane film
1200 UAHDRL LED strip
1470 UAHInstallation work
2000 UAHThe total cost
13910 UAHResult
The cost of work in each case is individual and depends on the condition of the automotive optics, its problems, the exchange rate when purchasing consumables and installation elements of automotive optics and auto lights.
We restored the adaptive frame, replaced the bulbs, polished the glass and protected it with film — now the light is not only bright, but also reliably protected.
Read more Профілактика фар автомобіляThe owner of an Infiniti FX35 was left without clearance lights and brake lights due to burnt-out diodes. We re-soldered the line with new original diodes and restored the rear lights to their factory condition.
Read more Prevention of car headlightsWe replaced the factory lenses, restored the transparency of the optics and protected them with a polyurethane film for long-term service.
Read more Installation of lenses in car headlightsWe emphasised the aggressive style of the BMW 7 by installing new lenses, grinding and polishing the glass, and additionally painting the masks.
Read more Installation of lenses in car headlightsComprehensive headlight upgrade: clear glass, Galaxy Q5 3.0‘ and Morimoto Mini H1 2.5’ bi-xenon lenses, black matte reflectors and company logo on the lenses
Read more Installation of lenses in car headlights