Lexus
LX 470The cost of work in each case is individual and depends on the condition of the vehicle optics, its malfunctions, the exchange rate when purchasing consumables and elements of vehicle optics and vehicle lighting.
Cost of works and materials:
-
Робота із заміни лінз
5000 UAH -
Установчі матеріали
6800 UAH -
Шліфування та полірування фар
800 UAH -
Обклеювання фар захисною плівкою
1200 UAH
-
Poor light and glare from oncoming traffic
The owner of a Lexus LX 470 contacted our car lighting service in Kyiv with a complaint about extremely poor headlight quality. According to the customer, the car began to dazzle oncoming traffic, and standard headlight angle adjustment did not help.
To accurately determine the cause of the problem, our specialists projected the light beam onto a special screen. This approach allows us to see the real picture of how the optics work and to identify hidden defects.
-
Lexus LX 470 headlight diagnostics: what the light projection showed
During the inspection, it became clear that the problem lay in the halogen headlight modules. The first step was to remove the installed lamps — they had no critical defects. For the sake of experiment purity, new halogen lamps were installed, but this did not improve the light output. Next, the specialists used a technical endoscope to assess the condition of the reflector inside the halogen lens. This is where the reason for the unbalanced and incorrect light became clear — the reflector was significantly worn out.
-
Why replacing the lenses is the only correct solution
Despite the headlights appearing to be in good condition, it was impossible to restore the correct light without interfering with the module. Theoretically, there is an option to restore the reflector, but our service does not use such solutions on principle. The reason is simple: it is impossible to predict how long a hand-restored reflector will last and how stable it will be over time.
Therefore, we offered the owner a professional replacement of the lenses in the Lexus LX 470 headlights with the installation of new 3.0-inch bi-xenon modules. This is the optimal solution for complete restoration of light and comfortable night driving.
-
Installation of bi-xenon lenses and additional work
After agreeing on the solution, new 3.0" bi-xenon lenses were installed. At the same time, it was decided to polish the headlight glass and apply a protective SunTek polyurethane film to preserve the result for a long time.
-
Headlight polishing and professional light adjustment
The next step was to grind and polish the headlight glass, which removed cloudiness and micro-scratches. After that, we applied SunTek protective film, which protects the optics from stones, ultraviolet rays and premature wear. The final and very important stage was adjusting the bi-xenon lenses on the adjustment stand in accordance with current standards.
-
Result: correct light beam according to standards
After precise adjustment, the headlight beam was brought into compliance with DSTU and EEC standards. The light beam became clear, uniform and safe for oncoming traffic. The difference between how the car's headlights shone before arriving at the service centre and the final result is more than noticeable.
-
Technical note on light projection photos
We would like to draw the attention of our website visitors to the fact that in some cases, the light projection from bi-xenon lenses may not completely fill the lower part of the screen. This is due to the failure to maintain the optimal distance between the car and the projector screen.
This is especially true for SUVs and minibuses. For the most accurate visualisation, the screen should be located at least 1.5 metres from the car. Due to the characteristics of the boxes, some photos may look like this, but this does not affect the actual quality and accuracy of the light on the road.
-
Cost of work performed
More informationCar
Lexus LX 470Completed works
-
Робота із заміни лінз
5000 UAH -
Установчі матеріали
6800 UAH -
Шліфування та полірування фар
800 UAH -
Обклеювання фар захисною плівкою
1200 UAH -
The total cost
13800 UAH
Result
The cost of work in each case is individual and depends on the condition of the car optics, existing problems, and the exchange rate when purchasing consumables and installation elements for car lights.
-
More completed works
-
Light improvement in Toyota Prado 120
Installation of bi-xenon lenses, headlight polishing and SunTek film protection.
Read more Встановлення біксенонових лінз у фари автомобіля в Києві -
Replacement of a cracked halogen lens in a Mitsubishi Outlander headlight
We explain how we turned a cracked lens problem into stylish and powerful bi-xenon optics.
Read more Встановлення біксенонових лінз у фари автомобіля в Києві -
Installation of xenon with Galaxy G5 lenses in Suzuki Grand Vitara optics
The installation of Galaxy G5 xenon restored the bright and confident light of the Suzuki Grand Vitara headlights.
Read more Встановлення біксенонових лінз у фари автомобіля в Києві -
Replacement of standard halogen lenses with 3.0-inch bi-xenon lenses in a BMW X5 e53
Weak and scattered light from the headlights of a BMW X5 e53 most often indicates worn halogen modules that need to be replaced with more modern lenses.
Read more Встановлення біксенонових лінз у фари автомобіля в Києві -
Replacement of factory lenses on a Suzuki Grand Vitara
We installed bi-xenon lenses on a Suzuki Grand Vitara instead of the standard ones, and the light became bright and safe.
Read more Встановлення біксенонових лінз у фари автомобіля в Києві
We value your privacy 
