BMW
7-series e38The cost of work in each case is individual and depends on the condition of the vehicle optics, its malfunctions, the exchange rate when purchasing consumables and elements of vehicle optics and vehicle lighting.
Cost of works and materials:
-
Installation work
2000 UAH -
Set of 3.0-inch lenses
1700 UAH -
Connection work
350 UAH -
Soldering of headlight glass
450 UAH -
Headlight polishing
500 UAH -
Covering headlights with polyurethane film
800 UAH
-
Overview
Initially, the owner of this car wanted to seal the headlights. But he also understood that the lenses of his iron horse were no longer working at 100%. When dismantling the car, the owner asked to diagnose the factory lenses and, if necessary, replace the factory lenses in the car headlights.
-
When the headlights were disassembled, the car's lenses were carefully diagnosed for damage to the lens reflector. To get the most out of the light on the road, the factory lenses in the car's headlights needed to be replaced.
-
We replaced the standard lenses with Galaxy Q5 3.0 inch bi-xenon lenses. The bi-xenon lenses installed in the car headlights are 2.5 times more efficient than the factory mono lenses. The installed bi-xenon lenses provide not only effective low beam, but also additional high beam on the road surface. At the time of installation, we found some issues with the headlight seals, and the headlight glass was broken. Probably from a minor accident or some kind of impact to the headlight. The headlight glass was soldered, treated with a special chemical adhesive, and cleaned of dirt. The car headlights underwent a full cycle of grinding and polishing, followed by covering with polyurethane film to protect against stones, sand and chemicals found on the road.
-
Before/After
The car owner recently replaced the D2S Orsam bulbs, leaving the same bulbs in place. The difference in the car's lighting can be seen in the photos.
-
Cost of work performed:
More informationCar
BMW 7-series e38Completed works
-
Installation work
2000 UAH -
Set of 3.0-inch lenses
1700 UAH -
Connection work
350 UAH -
Soldering of headlight glass
450 UAH -
Headlight polishing
500 UAH -
Covering headlights with polyurethane film
800 UAH -
The total cost
5800 UAH
Result
The cost of work in each case is individual and depends on the condition of the car optics, its problems, the exchange rate at the time of purchase of consumables and installation elements of car optics and auto lighting.
-
More completed works
-
Repair of headlights fogging on Mercedes-Benz GL550
After unsuccessful silicone repair, the owner contacted us. We completely disassembled the headlight, removed the old sealant and carried out professional sealing with new materials.
Read more Prevention of car headlights -
Repair of foggy headlights on a Mazda 3
We sealed, polished and covered with film.
Read more Профілактика фар автомобіля -
Repair of foggy headlights on a BMW 116i e87
Sand and moisture got inside due to a forgotten headlight cover. After complete disassembly and sealing, the headlight looks like new again.
Read more Герметизація автомобільних фар -
Replacing factory lenses with Galaxy Q5 3.0 bi-xenon lenses in Volkswagen Passat B6
We installed Galaxy Q5 bi-xenon headlights, polished the headlights and protected them with polyurethane film for better visibility at night.
Read more Installation of lenses in car headlights -
Repair of foggy headlights on a BMW 3 e90
After the bumper was hit, we restored the seal, soldered the fasteners, replaced the marker and reassembled the headlight to its factory appearance.
Read more Профілактика фар автомобіля
We value your privacy 
