Peugeot
605The cost of work in each case is individual and depends on the condition of the vehicle optics, its malfunctions, the exchange rate when purchasing consumables and elements of vehicle optics and vehicle lighting.
Cost of works and materials:
-
Виготовлення прозорого скла
2300 UAH -
Установчий комплект бі-лінз 3.0 дюйма
5540 UAH -
Установчий комплект бі-лінз 2.5 дюйма
2360 UAH -
Фарбування відбивача
700 UAH -
Нанесення логотипу на бі-лінзі 2.5 дюйма
2000 UAH -
Робота зі встановлення
2500 UAH
-
Overview
An executive car from the 90s, as good as ever. But the factory halogen light leaves much to be desired.
-
With halogen headlights like these, there's no question of road safety in the dark. A project was developed individually for this car by our Car Light Design team. The first step in upgrading the lights on this car was to make transparent glass for the headlights. Since the original glass has complex bending angles, it was decided to grind and polish the inside of the glass and remove the corrugations from the glass.
-
After the manipulations with the headlight glass, the glass was transformed, and we got transparent and clean elements for the next project. The car was made twice, the first time we installed Galaxy Q5 3 .0 inch bi-xenon lenses under a D2S lamp with 55w ignition units. The lamps were installed in the original Philips 4.300K.
-
The second round
But the project of this car did not end there! The car came to us again. The car's headlights were additionally fitted with Morimoto Mini H1 2.5 inch bi-xenon lenses, 55w ignition units and H1 Contrast lamps, and all headlight reflectors were painted in matte black.
-
The 2.5-inch bi-lenses were customised with the company logo. The logo is not projected on the roadway, the luminous flux remains unchanged. There is no break in the luminous flux!
-
Peugeot 605 with 3.0 bi-xenon lenses installed on a D2S lamp with 55w ignition units
The car received a new look, new light on the roadway, and individual tuning. Pay attention to the light filling in front of the bumper. Now all the pits and hatches are visible from afar! Check out the video to see how the light quality is.
-
Cost of the work performed:
More informationCar
Peugeot 605Completed works
-
Виготовлення прозорого скла
2300 UAH -
Установчий комплект бі-лінз 3.0 дюйма
5540 UAH -
Установчий комплект бі-лінз 2.5 дюйма
2360 UAH -
Фарбування відбивача
700 UAH -
Нанесення логотипу на бі-лінзі 2.5 дюйма
2000 UAH -
Робота зі встановлення
2500 UAH -
The total cost
15400 UAH
Result
The cost of the work is individual in each case and depends on the condition of the automotive optics, its problems, the exchange rate when purchasing consumables and installation elements for automotive optics and auto lights.
-
More completed works
-
Replacement of Audi A6 headlight glass
Dull or cracked Audi A6 headlight glass not only spoils the appearance of the car, but also significantly reduces the light output.
Read more Заміна скла автомобільних фар -
Replacement of a cracked halogen lens in a Mitsubishi Outlander headlight
We explain how we turned a cracked lens problem into stylish and powerful bi-xenon optics.
Read more Встановлення лінз у фари автомобіля -
Polishing Mitsubishi Outlander XL headlights
The headlights of the Mitsubishi Outlander XL lost their transparency after years of use. We restored their appearance and brightness — see the result!
Read more Полірування та шліфування автомобільних фар -
Installation of bi-xenon in American Subaru Outback headlights
Redesigned optics, a new level of light and confidence on the road
Read more Встановлення лінз у фари автомобіля -
Switch from halogen to bi-xenon optics on a Nissan Juke
Nissan Juke light upgrade: replacement of halogen optics with 3.0″ bi-xenon lenses with precise light adjustment.
Read more Встановлення лінз у фари автомобіля
We value your privacy 
