Mazda
CX-7The cost of work in each case is individual and depends on the condition of the vehicle optics, its malfunctions, the exchange rate when purchasing consumables and elements of vehicle optics and vehicle lighting.
Cost of works and materials:
-
Білінзи Galaxy Q5 3.0 дюйма
1640 UAH -
Робота з установки
2000 UAH -
Шліфування і полірування фар
800 UAH -
Обклеювання фар поліуретановою плівкою
1000 UAH -
Габарити Philips Led w5w
520 UAH
-
Overview
As a rule, Japanese cars have poor light. Even with the presence of a renowned optics manufacturer for the Japanese automotive industry and factory-installed lenses in the car’s headlights, there is no light on the roadway for some reason.
-
This car was fitted with 2.5-inch xenon mono lenses for the D2S lamp from the factory, and the owner of the car was not comfortable driving in the dark. Our team suggested replacing the factory lenses with Galaxy Q5 3.0 inch bi-xenon lenses . Bi-xenon lenses are the functionality of low beam and high beam in one lens. At the factory, there are 2 high beams, after replacing the standard lenses, there are 4 high beams, while the appearance of the headlight has not been changed, the functionality of the computer works properly and without errors! But the efficiency of the luminous flux on the roadway has increased significantly!
-
Galaxy Q5 3.0-inch bi-xenon lenses were installed in the car's headlights under the D2S lamp, the same lamp base that was supplied from the factory. Replacing the stock lenses allowed not only to increase the lens inch, but also to add additional high beam due to the bi-lens. The size of the lens allows you to get the maximum amount of light flux on the roadway. New original Philips D2S lamps were installed on the cars. The same lamps were used for the new bi-lenses.
-
The disassembled headlight shows clear, clean light passing through the new lens. The horizon of the lenses was adjusted and then fixed in its original place. Additionally, the car's headlights were grinded and polished, followed by gluing the headlights with polyurethane film. We also installed Philips w5w LEDs in the dimensions to match the headlight temperature and dimensions.
-
The light of the car before replacing the stock lenses and after replacing the stock lenses speaks for itself.
-
The cost of the work performed:
More informationCar
Mazda CX-7Completed works
-
Білінзи Galaxy Q5 3.0 дюйма
1640 UAH -
Робота з установки
2000 UAH -
Шліфування і полірування фар
800 UAH -
Обклеювання фар поліуретановою плівкою
1000 UAH -
Габарити Philips Led w5w
520 UAH -
The total cost
5960 UAH
Result
The cost of work in each case is individual and depends on the condition of the automotive optics, its problems, the exchange rate when purchasing consumables and installation elements of automotive optics and auto lights.
-
More completed works
-
Honda Accord 7 headlight restoration
Glass replacement, cleaning, polishing and protection to restore bright light and appearance
Read more Профілактика фар автомобіля у Києві -
Fogging of the rear brake lights on an Audi A6
We dismantled and sealed the rear footwells of an Audi A6 after they had fogged up. The moisture did not have time to damage the diodes — everything was saved in time.
Read more LED‑ремонт і модернізація центрального стоп-сигналу (CHMSL) -
Headlight care for Honda Accord 8
Restored the transparency and shine of Honda Accord 8 headlights thanks to complete preventive maintenance and glass polishing.
Read more Профілактика фар автомобіля у Києві -
Restoring the light transmission of Chevrolet Captiva headlights
We restored the transparency of Chevrolet Captiva headlights from the inside and outside. The result is factory-quality light without replacing the optics.
Read more Полірування та шліфування автомобільних фар -
Replacement of the LED module in Mercedes-Benz GLC headlight
The Mercedes-Benz GLC LED headlight lost its high beam due to a burnt-out module.
Read more Профілактика фар автомобіля у Києві
We value your privacy 
