Chevrolet
CamaroThe cost of work in each case is individual and depends on the condition of the vehicle optics, its malfunctions, the exchange rate when purchasing consumables and elements of vehicle optics and vehicle lighting.
Cost of works and materials:
-
Установчі матеріали
5800 UAH -
Робота з установки
6000 UAH -
Шліфування та полірування фар
800 UAH -
Обклеювання фар захисною плівкою
1200 UAH -
Установка диявольських очей (Devil Eyes)
1200 UAH
-
When optics need to be modernised again
There are cars whose optics are upgraded more than once. The Chevrolet Camaro is one such case. Previously, the standard halogen optics had already been converted to bi-xenon, but over time, the light lost its brightness again. It was the deterioration in lighting quality that led to another headlight overhaul with the addition of individual tuning elements.
-
The original condition of the Chevrolet Camaro headlights
When the Chevrolet Camaro arrived at our auto lighting service, it had 2.5-inch bi-xenon lenses installed in the standard halogen optics. Visually, the headlights looked decent, but the owner was not satisfied with the actual brightness of the light. Replacing the car lamps did not produce the desired effect, so it became clear that the problem was with the lenses, which had already reached the end of their service life.
-
Solution: 3.0-inch lenses + Devil Eyes
Understanding the procedure for working with headlights, the owner of the Chevrolet Camaro decided to take a comprehensive approach to the upgrade. The decision was made to:
- replace the 2.5-inch bi-xenon lenses with 3.0-inch ones;
- add Devil Eyes to the optics;
- match the colour of the Devil Eyes with the factory-fitted lights for a cohesive look.
After agreeing on all the details regarding the materials and stages of work, the headlights were removed from the car.
-
Removal and replacement of bi-xenon lenses
After separating the headlight glass from the housing, the service technicians removed the worn 2.5-inch bi-xenon lenses and prepared the optics for the installation of new modules. They were replaced with 3.0-inch bi-xenon lenses with red Devil Eyes.
-
Headlight assembly and leak test
After installing the new lenses, the optics were assembled with a new sealed seam and left for the technological time required for the sealant to crystallise. The headlights were then tested to ensure there were no prerequisites for fogging. After successful testing, the upgraded optics were reinstalled on the car and connected to the electrical system. After the auto electrician's work, the headlights ‘came to life’ with the bright light of Devil Eyes.
-
Glass polishing and light adjustment
The next step was external polishing of the headlight glass, followed by covering it with protective polyurethane filmto preserve the result for a long time. After that, the car was sent to the final stage — headlight adjustment using a professional device with settings within factory standards.
-
Result: light before and after modification
After the adjustment was completed, the final light projection was performed on the stand. The difference between the previous 2.5-inch lenses and the new 3.0-inch bi-xenon lenses became obvious. The light became brighter, more uniform and more predictable, and the additional Devil Eyes gave the headlights an individual and aggressive character.
-
Cost of work performed
More informationCar
Chevrolet CamaroCompleted works
-
Установчі матеріали
5800 UAH -
Робота з установки
6000 UAH -
Шліфування та полірування фар
800 UAH -
Обклеювання фар захисною плівкою
1200 UAH -
Установка диявольських очей (Devil Eyes)
1200 UAH -
The total cost
15000 UAH
Result
The cost of work in each case is individual and depends on the condition of the car optics, existing problems, and the exchange rate when purchasing consumables and installation elements for car lights.
-
More completed works
-
Headlight care for Honda Accord 8
Restored the transparency and shine of Honda Accord 8 headlights thanks to complete preventive maintenance and glass polishing.
Read more Профілактика фар автомобіля у Києві -
Polishing the exterior of Toyota Prado 150 headlights in Kyiv
Yellowing of the protective layer on plastic headlights is a common problem that can be easily remedied with professional exterior polishing.
Read more Полірування та шліфування фар у Києві -
Installation of lenses in Honda Civic 4D headlights
Installation of 3.0-inch bi-lenses, glass polishing and SunTek film protection.
Read more Встановлення біксенонових лінз у фари автомобіля в Києві -
Installation of devil eyes in BMW 6-Series e63 headlights in Kyiv
A minor upgrade of BMW optics not only refreshes the appearance of the headlights, but also adds a bright individual character to the car.
Read more Тюнінг фар автомобіля у Києві -
Repairing a Subaru Outback headlight after an accident
We repaired a Subaru Outback headlight after an accident: soldering the housing and installing new glass.
Read more Ремонт тріщин фар автомобіля
We value your privacy 
