Mitsubishi
SigmaThe cost of work in each case is individual and depends on the condition of the vehicle optics, its malfunctions, the exchange rate when purchasing consumables and elements of vehicle optics and vehicle lighting.
Cost of works and materials:
-
Установчий комплект біксенонових лінз
5600 UAH -
Робота зі встановлення лінз
5000 UAH -
Фарбування відбивачів і масок фар
800 UAH
-
Prerequisites for light modernisation
The owner of a Mitsubishi Sigma contacted our car lighting service in Kyiv. Despite the car's considerable age, its appearance was still in good condition. However, over time, a problem arose with the front optics — one of the headlights began to fog up, which directly affected the quality of road lighting. It was this malfunction that prompted the owner to contact the service centre.
-
Diagnosis of the condition of the halogen light
Realising that the headlight would have to be opened in any case to eliminate the fogging, the owner decided to take advantage of the situation to comprehensively improve the car’s lighting.
The service technicians projected the light onto a screen to objectively assess the condition of the halogen optics.
After the diagnostics, there was no doubt: installing 3.0-inch bi-xenon lenses was the optimal solution. Such a modernisation:
- significantly increases the light output;
- forms a clear light-shadow boundary;
- simultaneously solves the problem of fogging headlights.
-
Preparing the headlights for the installation of bi-xenon lenses
After agreeing on the budget and the list of components, the technicians got to work.
-
The headlights were removed from the car. The glass was separated from the body, after which the reflectors were removed. The reflector areas where bi-xenon lenses were to be installed were prepared for painting in matte black. The bi-xenon lens masks were also prepared for painting.
After preparation, all elements were painted and dried in accordance with technological requirements.
-
Installation of bi-xenon lenses and headlight assembly
3.0-inch bi-xenon modules were installed on the prepared internal headlight elements. Next, the headlights were assembled with a new sealed seam and left for the technological time required for the sealant to crystallise. After the seam had set, a test was carried out to check that there were no prerequisites for re-fogging. After ensuring that the seal was tight, the headlights were reinstalled on the car. Next, an auto electrician joined the work, integrating the ignition units into the Mitsubishi Sigma's electrical circuit.
-
Light adjustment with a device
After connecting the optics, the specialists performed light adjustment of the bi-xenon lenses using a professional device. The light beam was precisely adjusted in accordance with the standards to ensure maximum efficiency and not to dazzle oncoming traffic. After completing all procedures for installing bi-xenon lenses in halogen optics, the final stage began — a control light projection.
-
The result of headlight modernisation
After all the work was completed, Mitsubishi Sigma received:
- bright and uniform light;
- a clear light-shadow boundary;
- the problem of headlight fogging was eliminated;
- a renewed and more modern look for the optics.
The comprehensive installation of bi-xenon lenses significantly increased the comfort and safety of driving at night.
-
Cost of work performed
More informationCar
Mitsubishi SigmaCompleted works
-
Установчий комплект біксенонових лінз
5600 UAH -
Робота зі встановлення лінз
5000 UAH -
Фарбування відбивачів і масок фар
800 UAH -
The total cost
11400 UAH
Result
The cost of work in each case is individual and depends on the condition of the car optics, existing problems, and the exchange rate when purchasing consumables and installation elements for car lights.
-
More completed works
-
Repair of Nissan Murano car optics
The Nissan Murano headlights were barely working — the low beam resembled parking lights, and condensation had formed inside. During disassembly, we found cracks in the glass and burnt-out reflectors.
Read more Встановлення біксенонових лінз у фари автомобіля в Києві -
Installation of bi-xenon lenses in Ford Kuga headlights in Kyiv
When halogen headlights no longer illuminate the road effectively, installing bi-xenon lenses is the most effective solution for restoring safe lighting.
Read more Встановлення біксенонових лінз у фари автомобіля в Києві -
Replacement of halogen lights with xenon lights in Subaru Tribeca optics
Replacement of halogen lenses with 3.0″ bi-xenon lenses with polishing and SunTek protective film.
Read more Встановлення біксенонових лінз у фари автомобіля в Києві -
Replacement of lenses in Hyundai Sonata LPI headlights
We replaced the lenses in a Hyundai Sonata LPI and restored bright, focused light — now the car is easy to drive at night, even on unlit roads.
Read more Встановлення біксенонових лінз у фари автомобіля в Києві -
Replacement of lenses in Lexus LX 470 headlights in Kyiv
Problems with Lexus LX 470 headlights are often related not to the bulbs, but to worn-out optical modules that require professional lens replacement.
Read more Встановлення біксенонових лінз у фари автомобіля в Києві
We value your privacy 
